/* Crc - 32 BIT ANSI X3.66 CRC checksum files */

#include "crc32.h"
#include <stdio.h>

/**********************************************************************\
|* Program to compute the 32-bit CRC used as the frame                *|
|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71     *|
|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level     *|
|* protocol).  The 32-bit FCS was added via the Federal Register,     *|
|* 1 June 1982, p.23798.  I presume but don't know for certain that   *|
|* this polynomial is or will be included in CCITT V.41, which        *|
|* defines the 16-bit CRC (often called CRC-CCITT) polynomial.  FIPS  *|
|* PUB 78 says that the 32-bit FCS reduces otherwise undetected       *|
|* errors by a factor of 10^-5 over 16-bit FCS.                       *|
\**********************************************************************/


/* Copyright (C) 1986 Gary S. Brown.  You may use this program, or
   code or tables extracted from it, as desired without restriction.*/

/* First, the polynomial itself and its table of feedback terms.  The  */
/* polynomial is                                                       */
/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
/* Note that we take it "backwards" and put the highest-order term in  */
/* the lowest-order bit.  The X^32 term is "implied"; the LSB is the   */
/* X^31 term, etc.  The X^0 term (usually shown as "+1") results in    */
/* the MSB being 1.                                                    */

/* Note that the usual hardware shift register implementation, which   */
/* is what we're using (we're merely optimizing it by doing eight-bit  */
/* chunks at a time) shifts bits into the lowest-order term.  In our   */
/* implementation, that means shifting towards the right.  Why do we   */
/* do it this way?  Because the calculated CRC must be transmitted in  */
/* order from highest-order term to lowest-order term.  UARTs transmit */
/* characters in order from LSB to MSB.  By storing the CRC this way,  */
/* we hand it to the UART in the order low-byte to high-byte; the UART */
/* sends each low-bit to hight-bit; and the result is transmission bit */
/* by bit from highest- to lowest-order term without requiring any bit */
/* shuffling on our part.  Reception works similarly.                  */

/* The feedback terms table consists of 256, 32-bit entries.  Notes:   */
/*                                                                     */
/*  1. The table can be generated at runtime if desired; code to do so */
/*     is shown later.  It might not be obvious, but the feedback      */
/*     terms simply represent the results of eight shift/xor opera-    */
/*     tions for all combinations of data and CRC register values.     */
/*                                                                     */
/*  2. The CRC accumulation logic is the same for all CRC polynomials, */
/*     be they sixteen or thirty-two bits wide.  You simply choose the */
/*     appropriate table.  Alternatively, because the table can be     */
/*     generated at runtime, you can start by generating the table for */
/*     the polynomial in question and use exactly the same "updcrc",   */
/*     if your application needn't simultaneously handle two CRC       */
/*     polynomials.  (Note, however, that XMODEM is strange.)          */
/*                                                                     */
/*  3. For 16-bit CRCs, the table entries need be only 16 bits wide;   */
/*     of course, 32-bit entries work OK if the high 16 bits are zero. */
/*                                                                     */
/*  4. The values must be right-shifted by eight bits by the "updcrc"  */
/*     logic; the shift must be unsigned (bring in zeroes).  On some   */
/*     hardware you could probably optimize the shift in assembler by  */
/*     using byte-swap instructions.                                   */

static UINT4 crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
0x00000000UL, 0x77073096UL, 0xee0e612cUL,
0x990951baUL, 0x076dc419UL, 0x706af48fUL,
0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL,
0x79dcb8a4UL, 0xe0d5e91eUL, 0x97d2d988UL,
0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL,
0xf3b97148UL, 0x84be41deUL, 0x1adad47dUL,
0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL,
0x136c9856UL, 0x646ba8c0UL, 0xfd62f97aUL,
0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL,
0x4c69105eUL, 0xd56041e4UL, 0xa2677172UL,
0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL,
0xa50ab56bUL, 0x35b5a8faUL, 0x42b2986cUL,
0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL,
0x26d930acUL, 0x51de003aUL, 0xc8d75180UL,
0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL,
0xcfba9599UL, 0xb8bda50fUL, 0x2802b89eUL,
0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL,
0xb6662d3dUL, 0x76dc4190UL, 0x01db7106UL,
0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL,
0x06b6b51fUL, 0x9fbfe4a5UL, 0xe8b8d433UL,
0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL,
0x91646c97UL, 0xe6635c01UL, 0x6b6b51f4UL,
0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL,
0x6c0695edUL, 0x1b01a57bUL, 0x8208f4c1UL,
0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL,
0x15da2d49UL, 0x8cd37cf3UL, 0xfbd44c65UL,
0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL,
0xd4bb30e2UL, 0x4adfa541UL, 0x3dd895d7UL,
0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL,
0x44042d73UL, 0x33031de5UL, 0xaa0a4c5fUL,
0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL,
0xbe0b1010UL, 0xc90c2086UL, 0x5768b525UL,
0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL,
0xc7d7a8b4UL, 0x59b33d17UL, 0x2eb40d81UL,
0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL,
0x9abfb3b6UL, 0x03b6e20cUL, 0x74b1d29aUL,
0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL,
0x0d6d6a3eUL, 0x7a6a5aa8UL, 0xe40ecf0bUL,
0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL,
0xf00f9344UL, 0x8708a3d2UL, 0x1e01f268UL,
0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL,
0x89d32be0UL, 0x10da7a5aUL, 0x67dd4accUL,
0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL,
0x60b08ed5UL, 0xd6d6a3e8UL, 0xa1d1937eUL,
0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL,
0xd80d2bdaUL, 0xaf0a1b4cUL, 0x36034af6UL,
0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL,
0x316e8eefUL, 0x4669be79UL, 0xcb61b38cUL,
0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL,
0x5505262fUL, 0xc5ba3bbeUL, 0xb2bd0b28UL,
0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL,
0xb5d0cf31UL, 0x2cd99e8bUL, 0x5bdeae1dUL,
0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL,
0x72076785UL, 0x05005713UL, 0x95bf4a82UL,
0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL,
0x92d28e9bUL, 0xe5d5be0dUL, 0x7cdcefb7UL,
0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL,
0xf6b9265bUL, 0x6fb077e1UL, 0x18b74777UL,
0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL,
0x11010b5cUL, 0x8f659effUL, 0xf862ae69UL,
0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL,
0xa7672661UL, 0xd06016f7UL, 0x4969474dUL,
0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL,
0x40df0b66UL, 0x37d83bf0UL, 0xa9bcae53UL,
0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL,
0x24b4a3a6UL, 0xbad03605UL, 0xcdd70693UL,
0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL,
0xc4614ab8UL, 0x5d681b02UL, 0x2a6f2b94UL,
0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
0x2d02ef8dUL,
};



inline	UINT4
UPDC32(
		UBYTE					octet,
		UINT4					crc)
{
	return	crc_32_tab[(UINT2)((crc ^ octet) & 0xFFUL)] ^ (crc >> 8);
}



crc32::crc32()
{
	init();
} /* crc32::crc32() */


crc32::~crc32()
{
	/* nada */
} /* crc32::~crc32() */





void
crc32::init()
{
	result_.crc			= 0xFFFFFFFFUL;
	result_.nChars			= 0;
} /* crc32::init() */




void
crc32::processBuffer(
		UBYTE*					buffer,
		UINT4					nBytesInBuffer)
{
	register	UINT4	oldcrc32	= result_.crc;
	register	UINT4	crc32;
	register	UINT4	oldcrc;

	register	UINT4	i;
	UBYTE*		p_buffer;
	for(	i=0,
		p_buffer=buffer
		;
		i<nBytesInBuffer
		;
		++i, ++p_buffer
	   )
	{
        	oldcrc32 = UPDC32(*p_buffer, oldcrc32);
	} /* for(	i=0 */

	result_.nChars	+= nBytesInBuffer;
	result_.crc	= oldcrc32;
}



crc32::result&
crc32::get_result()
{
	register 	UINT4	oldcrc32	= result_.crc;
	result_.crc = ~oldcrc32;

	return	result_;
} /* crc32::get_result() */



